Solar Water Heater TRIMO BETA 200/2,6 m2 CuS - CLOSED LOOP Solar Water Heater TRIMO BETA 200/2,6 m2 CuS - SELECTIVE ABSORBER - CLOSED LOOP.. TRIMO Solar Innovations Product #: 0025 based on 0 Reviews Regular price: $1,200.00 $1,200.00 10000

Solar Water Heater TRIMO BETA 200/2,6 m2 CuS - CLOSED LOOP


Brand: TRIMO Solar Innovations
Product Code: 0025
Availability: 10000

Price: € 1,200.00
Ex Tax: € 1,200.00

- +
- OR -

Solar Water Heater TRIMO BETA – Thermosiphon

Selective Collector – Close Loop System

 

Model: TRIMO BETA 200 CuS /2.6 – 1x2.6m2

 

DESCRIPTION:
TRIMO BETA Solar Systems constitute an ecological proposal and an effective energy solution, combining high output, autonomy, aesthetics, facility in the installation and money saving. They are made of excellent materials according to international specifications and have all the certifications and tests that confirm their quality.

 

They are highly aesthetic systems, which can be simply and quickly installed to blend with the traditional or modern architecture of a building and to provide free hot water almost the whole year round. Even in regions with low sunlight they achieve the preheating of the water, which contributes to a drastically reduced consumption of conventional energy.

 

With the use of solar systems, thermosiphon or forced circulation is achieved energy saving of 70-100%. At the same time the operation time of the boiler or electric resistance is decreased, depending on the sunlight of each region and the system’s size, with simultaneous reduction of emission of carbon dioxide.

 

 

TRIMO BETA – WATER STORAGE TANK SPECIFICATIONS

·        Cylinder: 2.5 mm thickness cold rolled steel with a double internal layer of enamel, baked at 860°C according to DIN 4753. The enameling is done in our own high tech industrial facilities. The water storage tanks are checked individually upon exit from the enameling unit, assuring the top quality of the enamel.

·    Surrounding heat exchanger (Jacket): cold rolled steel, 1.5mm thickness for the operation of the closed loop which is compulsory at low temperatures and also in areas with water with high mineral content. It is specially designed so as to absorb the heat transfer medium pressure.

·         Thermal insulation: ecological, high-density, expanded polyurethane ensures minimum heat loss, maintaining the hot water temperature.

·         External housing: naval aluminium alloy.

·         Cathode protection by 2 magnesium anodes for effective protection against corrosion and mineral deposits caused by electrolytic reactions.

·     Large round flange rubber protected: innovative, smart design for the quick cleaning of minerals, fast replacement of anode and immediate access to the electrical components.

·     Complete sealing of EPDM, nontoxic material, which does not permit water to contact the flange, thus protecting it against electrolysis and corrosion, specially made to withstand the generally accepted specifications with regard to the heat resistance.

·         Heating element rated according to the country of destination local regulations. (Optional, for the use of electricity as an auxiliary power source). All electrical components carry a CE marking according to EN 60335-1 and EN60335-2-21 standards.

·      Automatically regulated thermostat with bipolar protection and auxiliary fuse. All electrical components carry a CE marking according to EN 60335-1 and EN60335-2-21 standards.

·         Protective cover: designed to ensure the proper ventilation of the electrical section and its protection from the environmental conditions.

·         Cold water inlet: brass 1/2” BSP male threaded pipe end for water stratification and 8bar safety valve for releasing pressure.

·         Hot water outlet: 1/2” BSP male threaded pipe end.

·         Jacket inlet: 3/4” BSP male threaded pipe end.

·         Jacket outlet: Closed loop circuit filling point: 3/4” BSP male threaded pipe end.

·         3.5 Bar safety valve connection location: 1/2” BSP male threaded pipe end.

·         External decorative covers made of ABS UV PROOF cover all joints, eliminating visible piping.

·       Heat exchanger with 3/4” BSP female threaded pipe ends, made of stainless steel hose, large exchange surface (160 lt & 200 lt: 0.38 m2, 320 lt: 0.76 m2) for use of the heating produced by central heating systems during the winter (optional).

 

COLLECTOR TRIMO BETA CuS SPECIFICATIONS

·         Collector frame of aluminium profile (Al Mg Si 05).

·         Rear cover of galvanized steel 0.5mm thick tightly fitted with elastic EPDM seal.

·         Water frame of suitable gauge and thickness: Headers are punched with upper expansion, for perfect manifolds fitting, thus avoiding pressure drop in the collectors.

Tube pitch = 107mm (EN 1652)

Copper water frame: Ø22 headers: solar collector feed and feed-back. Ø8 manifolds: solar collector thermoabsorption for the BETA CuS and BETA CuB models.

·         Complete area absorber made of black painted aluminium 0.3mm thick, or selective aluminium 0.4mm thick, covers the complete window area as well as the headers, thus increasing the collector’s absorbency, Laser Welded to the water frame.

·         High density, eco-friendly thermal insulation achieved with a 50mm and 20mm (back and lateral) thick layer of prepressed glass wool for the minimization of thermal losses. Glasswool insulation thermal conductivity: λ=0.032 W/m grd (DIN 56612, measured at 0°C)

·         Tempered solar glass, with a stable coefficient of expansion and high light transmittance, can withstand adverse weather conditions (e.g. hail storm, extreme temperature changes, etc.). ANSI Z 97-1 (U.S.A.) BS 6206 (G.BRITAIN) DIN 52337 (GERMANY).

 

SUPPORT BASE

One type of supporting base system, electrostatically painted, made of 2.5mm thick galvanized steel, with stainless steel screws and nuts for installation on flat or inclined surfaces.

 

TECHNICAL DATA

 

TOTAL SYSTEM BETA CuS 200 lt/2.6 m2

  • NUMBER OF COLLECTORS: 1
  • SYSTEM WEIGHT EMPTY / FULL (kg): 158 / 368
  • MAX WATER TANK OPERATING PRESSURE (bar): 8
  • CLOSED CIRCUIT MAX OPERATING PRESSURE (bar): 3.5

 

WATER STORAGE TANK 200 lt

  • DIMENSIONS (mm): 580x1400
  • WEIGHT EMPTY (kg): 79
  • JACKET CAPACITY (lt): 18
  • JACKET SURFACE (m2): 1.24
  • MAX TEST PRESSURE (bar): 12
  • MAX OPERATING PRESSURE (bar): 8

 

COLLECTOR BETA CuS 2600

  • TOTAL AREA (m²): 2.60
  • NUMBER OF MANIFOLDS: 11 (Ø8)
  • HEAT TRANSFER MEDIUM: PROPYLENE GLYCOL SOLUTION
  • CAPACITY (lt): 1.64
  • ABSORBER SURFACE (m2): 2.30
  • TOTAL DIMENSIONS LxWxH (mm): 2030x1280x80
  • COLLECTOR TOTAL WEIGHT (without liquid) (kg): 45
  • ABSORBER: SELECTIVE ALUMINIUM
  • ABSORBENCY / RADIATION COEFFICIENT: 95% ±2% / 5% ±2%

 

THE SET INCLUDED:

·       WATER TANK WITH CAPACITY 200 L;

·       SOLAR COLLECTOR: 2.6 m2

·       SUPPORT BASE;

·       SET WITH FITTINGS;

·       PROPILEN GLICOL ANTIFRIZE.

 

OTHER INFORMATION:

·       Warranty: 5 years;

·       Water tank: Made In EU;

·       Collector: Made in EU;

·       Certificates: CE, TÜV, Solar Keymark, DIN, IQ Net, DQS, IAF;

·       Install

There is no specification for this product.
There are no reviews for this product.
Write a review
BadExcellent
Facebook comment
You are here: Home